RBG House of Design
Approvals

Planning Permission vs Building Regulations: What UK Homeowners Need to Know

By Rutu MehtaPublished Last updated 3 min read

Many homeowners assume "permission" is one thing. In England, planning permission and building regulations are two separate systems, and confusing them is a common cause of renovation delays. Rutu Mehta and the team at RBG House of Design see this often when planning projects across London, Watford, Surrey and Slough, so here is a plain-English guide.

The difference in one line

  • Planning permission is about what you build and how it affects the area: size, appearance and use.
  • Building regulations are about how you build it: safety, structure and standards.

A project may need one, both or neither.

Planning permission and internal work

Planning permission is generally not needed for internal alterations, including building or removing an internal wall. Important exceptions: a listed building needs listed building consent for significant works inside or out, and work that changes use, creates a separate unit or alters the exterior may need permission. In a conservation area, check before changing anything visible from outside.

Building regulations and internal work

Even without planning permission, building regulations usually apply:

Internal walls

Building regulations normally apply to building a new internal wall, removing one or forming an opening. Walls can carry loads from the roof, floors or the wall above, so a structural engineer should confirm whether a wall is load-bearing and design any beam needed.

Structural changes

Removing part of a chimney breast or altering a load-bearing wall.

Electrical work

Fixed electrical installations in homes must comply with Part P. A registered competent-person electrician can self-certify their work.

Drainage and fire safety

Altering drains or means of escape.

Loft, garage and basement conversions

These generally need approval.

Extensions and loft conversions

These often need both. Some fall under permitted development, which sets limits and conditions, tighter in conservation areas and on listed buildings. Rules are detailed and vary by property, so confirm with your local authority before assuming anything.

Other things to know

  • Party walls: work affecting a shared wall or chimney may need a party wall agreement.
  • Local variations: councils in London, Watford, Surrey and Slough each have their own teams and policies.
  • Retrospective approval is harder: doing work first and seeking approval later can be costly and stressful.

A simple checklist

  • Is your building listed or in a conservation area?
  • Are you changing the exterior, the use or creating a separate unit?
  • Are you altering walls, structure, drainage or electrics?
  • Are you extending or converting a loft?
  • Does any work involve shared walls?

A yes to any of these means getting advice before work begins.

Where design helps

Thorough space planning and full drawing sets make approvals far smoother, because everyone is working from accurate information. This is why detailed technical drawings are a core part of how RBG projects are delivered. See how drawings fit into our six-stage renovation process.

Quick takeaway

Treat approvals as part of the design stage, not an afterthought. Confirm requirements with your local planning authority or building control, and keep certificates for when you sell. This is general guidance, not legal advice.

Frequently asked questions

Do I need planning permission to remove an internal wall?

Usually not. Planning permission is generally not required for internal alterations. However, building regulations normally apply, and a load-bearing wall will need a structural engineer and likely a beam. Listed buildings and conservation areas are exceptions.

What is the difference between planning permission and building regulations?

Planning permission controls what you build and its impact on the area, size, appearance and use. Building regulations control how you build it, structure, fire safety, electrics, drainage and energy standards. They are separate systems administered by different teams.

Do I need building regulations approval for electrical work?

Fixed electrical installations in homes must comply with Part P. A registered competent-person electrician can self-certify the work, which avoids a separate application.

What is a party wall agreement?

If work affects a wall or chimney you share with a neighbour, the Party Wall Act may require you to serve notice and reach an agreement before work starts. It applies to common semi-detached and terraced work in London.

Can RBG help with the approvals process?

We produce the accurate drawings and specifications that make approvals smoother, and we coordinate the process as part of design and build. Talk to us about your project.

Rutu Mehta, founder of RBG House of Design

About the author

Led by Rutu Mehta, we design homes and commercial interiors across London & England.

Read more about Rutu Mehta

Sources: GOV.UK, planning permission and Building Regulations guidance; Party Wall Act guidance. And for everything else, the wider internet. After all, what can't you find online these days?